OKAYA ULTIMAXE Speciality Lubricants | CNG ECO, MOTO CHILL, HYDRO & START 2T
info@okayalubricants.com +91 96558-44750
OKAYA ULTIMAXE Specialities

Speciality Lubricants.
Formulated for Targeted Performance.

Engineered low-ash gas motor oils, radiator cooling fluids, heavy industrial hydraulic oils, and high-damping suspension fluids built for maximum uptime.

CNG ECO 20W-50 MOTO CHILL Coolant 1:4 HYDRO Hydraulic Oil HLP Series HYDRO Hydraulic Oil Anti-Wear Series Suspension Fluid 2T START Oil
Product Catalogue

Explore Speciality Fluid Product Line

Discover technical formulations, pack availability, and precision metrics across our specialized automotive and industrial oils.

OKAYA ULTIMAXE CNG ECO 20W-50 Pack
OKAYA ULTIMAXE
SPECIALITY CNG ECO 20W-50
OKAYA ULTIMAXE® · SPECIALITY FLUIDS

CNG ECO 20W-50

Low-Ash High-Temperature Lubricant for Gas-Powered Fleets

OKAYA ULTIMAXE CNG ECO 20W-50 dedicated gas engine motor oil.

A high-viscosity, low-ash multigrade engine oil engineered specifically for commercial and passenger vehicles powered by CNG, LPG, and alternate gas fuels. Its optimized sulfated ash chemistry protects exhaust valves and valve seats against recession, resists severe nitration, and maintains stable viscosity under high combustion heat.

Key product features
SAE 20W-50 | Low-Ash Gas Formulation Protects Against Exhaust Valve Seat Recession High Nitration & Oxidation Resistance Inhibits Spark Plug Bridging & Combustion Deposits
Available pack sizes
1 L 2.1 L 2.2 L 3 L 3.5 L 5 L 50 L 55 L 210 L
ENQUIRE ABOUT THIS PRODUCT
OKAYA ULTIMAXE MOTO CHILL Coolant 1:4 Pack
OKAYA ULTIMAXE
SPECIALITY MOTO CHILL Coolant 1:4
OKAYA ULTIMAXE® · SPECIALITY FLUIDS

MOTO CHILL Coolant 1:4

Heavy-Duty Ethylene Glycol Radiator Coolant Concentrate

OKAYA ULTIMAXE MOTO CHILL 1:4 concentrated engine cooling fluid.

A heavy-duty radiator coolant concentrate formulated with advanced corrosion inhibitors for an effective 1:4 dilution with pure water. Dissipates cylinder block heat rapidly, prevents engine boil-over in severe summer driving, and protects aluminum, brass, and solder radiators from electrolytic corrosion.

Key product features
Economical 1:4 Dilution Ratio with Clean Water Multi-Metal Corrosion Defense (Aluminum & Copper Safe) Prevents Hot-Weather Boil-Over & Water Pump Cavitation Suppresses Internal Scale and Sludge Buildup
Available pack sizes
1 L 3 L 5 L 50 L 55 L 210 L
ENQUIRE ABOUT THIS PRODUCT
OKAYA ULTIMAXE HYDRO Hydraulic Oil HLP Series Pack
OKAYA ULTIMAXE
SPECIALITY HYDRO Hydraulic Oil HLP Series
OKAYA ULTIMAXE® · SPECIALITY FLUIDS

HYDRO Hydraulic Oil HLP Series

High-Pressure Hydraulic Lubricant Meeting DIN 51524 Part 2

OKAYA ULTIMAXE HYDRO HLP industrial hydraulic fluid series.

Formulated for high-precision industrial machine tools, injection moulding lines, and automated hydraulic systems. Formulated with premium anti-wear agents, rapid air-release additives, and demulsifiers to deliver steady pressure transmission and protect hydraulic components against cavitation and abrasive wear.

Key product features
DIN 51524 Part 2 (HLP) Certified Performance Rapid Water Separation & Foam Suppression Protects High-Pressure Vane, Piston & Gear Pumps Smooth Hydraulic Cylinder Valve Actuation
Available pack sizes
5 L 10 L 20 L 26 L 50 L 55 L 210 L
ENQUIRE ABOUT THIS PRODUCT
OKAYA ULTIMAXE HYDRO Hydraulic Oil Anti-Wear Series Pack
OKAYA ULTIMAXE
SPECIALITY HYDRO Hydraulic Oil Anti-Wear Series
OKAYA ULTIMAXE® · SPECIALITY FLUIDS

HYDRO Hydraulic Oil Anti-Wear Series

High-Film-Strength Anti-Wear Oil for Heavy Hydraulic Systems

OKAYA ULTIMAXE HYDRO Anti-Wear series hydraulic oil.

A robust anti-wear hydraulic oil developed for mobile earthmoving equipment, excavators, presses, and industrial circulation systems operating under continuous high load. Resists thermal degradation, maintains tight seal compatibility, and stops internal varnish deposition.

Key product features
Extreme Pressure Anti-Wear (AW) Chemistry Protects Hydraulic Pumps from Scuffing & Seizure Non-Corrosive to Yellow Metals & Elastomer Seals Maintains Filterability in Fine Micron Filtration Circuits
Available pack sizes
5 L 10 L 20 L 26 L 50 L 55 L 210 L
ENQUIRE ABOUT THIS PRODUCT
OKAYA ULTIMAXE Suspension Fluid Pack
OKAYA ULTIMAXE
SPECIALITY Suspension Fluid
OKAYA ULTIMAXE® · SPECIALITY FLUIDS

Suspension Fluid

Precision Viscosity Damping Fluid for Motorcycle Front Forks

OKAYA ULTIMAXE Suspension Fluid for two-wheeler front forks.

A specialized hydraulic damping oil developed for two-wheeler front telescopic forks and rear shock absorbers. Delivers smooth compression and rebound damping by suppressing fluid aeration and foaming, while conditioning internal fork seals to eliminate oil leakage.

Key product features
Consistent Hydraulic Damping Response Under Impact Anti-Foam Matrix Eliminates Shock Aeration Protects Fork Sliders from Scoring & Scuffing Available in Compact 175 mL & 350 mL Bottle Sizes
Available pack sizes
175 mL 350 mL 20 L 26 L 50 L 55 L 210 L
ENQUIRE ABOUT THIS PRODUCT
OKAYA ULTIMAXE 2T START Oil Pack
OKAYA ULTIMAXE
SPECIALITY 2T START Oil
OKAYA ULTIMAXE® · SPECIALITY FLUIDS

2T START Oil

Low-Smoke Self-Mixing Lubricant for Two-Stroke Engines

OKAYA ULTIMAXE START 2T clean-burn two-stroke engine oil.

A high-lubricity two-stroke engine lubricant formulated for mopeds, scooters, auto-rickshaws, and portable 2T equipment. Blended with clean-burn additives to ensure rapid petrol miscibility, eliminate exhaust port carbon deposits, and guard against high-RPM piston ring sticking.

Key product features
Low-Smoke Clean Combustion Chemistry Self-Mixing with Petrol at Recommended Fuel-Oil Ratios Keeps Spark Plugs & Exhaust Silencers Deposit-Free Protects Crankshaft Needle Bearings & Piston Walls
Available pack sizes
500 mL 1 L 50 L 55 L 210 L
ENQUIRE ABOUT THIS PRODUCT
Application Guidelines

Selecting the Right Speciality Lubricant

Follow original equipment manufacturer recommendations regarding fluid dilution, viscosity grades, and mixing ratios.

01

Gas Engine Heat Control

CNG engines produce elevated combustion temperatures. Dedicated low-ash CNG ECO oil protects exhaust valves from recession and stops premature plug fouling.

02

Coolant Dilution Ratios

MOTO CHILL 1:4 concentrate must be mixed thoroughly with clean demineralized water to preserve corrosion inhibitor reserves and heat transfer efficiency.

03

Hydraulic System Pressures

Confirm the operating pressure and pump type (vane, gear, or piston) to choose the right HYDRO viscosity grade (ISO VG 32, 46, or 68).

Technical Guidance: Specifications, mixing ratios, and operating tolerances should be verified against current product Technical Data Sheets (TDS) and equipment OEM manuals. Certified batch COA documents are available upon request.

Need Technical Data Sheets or Bulk Quotes?

Contact OKAYA ULTIMAXE® technical and commercial representatives for pack availability, dealership terms, and bulk barrel dispatches.

WhatsApp Our Team Email Sales Desk